Skip to main content

What equipment do you need to make wood sawdust pellets?

Wood sawdust pellets have become the most popular fuel pellets nowadays. Whether it is large and medium-sized power plants, home heating and combustion, and even smoked meat stoves, wood pellets are used to provide heat. So, what kind of wood pellet making equipment is needed to produce this kind of fuel pellets?

For different raw materials (mainly wood materials, generally like: logs, forest waste, wood processing plant waste, waste wood, wood shavings, wood chips, wood sawdust, etc.), we RICHI Machinery will design different wood pellet production solutions for customers . The whole set wood pellet making equipment of the sawdust pellet production line includes the following equipment:

  • wood debarker machine
  • wood chipping machine
  • wood sawdust making machine
  • wood sawdust drying machine
  • wood pellet making machine
  • wood pellet cooling machine
  • wood pellet screening machine
  • cyclones
  • wood pellets storage system
  • wood pellet packing machine
  • ductwork and conveyors to link them all

Wood Chips Making Machine

the best wood chipper

It can be widely used in particle board factories, medium and high-density fiberboard factories, furniture factories, biomass power plants, wood chip factories, and biomass preparation industries in the biomass energy industry.

Drum wood chips making machine series are special equipment for the production of wood chips, with their large in-feed openings, logs or bundles of wood with a diameter of over a meter can be reliably processed in larger wood chippers.

Wood Sawdust Making Machine

wood crusher machine

The wood sawdust making machine adopts hammer blade design, which can be used to crush common materials. Because of the high output, it is usually used for crushing operations in pellet mills. It can be used alone, but it is generally installed in a pellet production line and used in conjunction with other wood sawdust pellet making equipment.

Wood Sawdust Drying Machine

sawdust dryer machine sale

In the wood pellets production process, if the moisture of the raw material does not meet the pelleting requirements, it needs to be dried. The wood sawdust drying machine adopts low-speed rotation and hammer bending to disperse the materials, so that the high-temperature air flow is mixed with the materials to achieve a uniform drying effect. It can dry wood sawdust, straw, rice and other materials.

Wood Sawdust Pellet Making Machine

wood pellet making machines

RICHI ring die wood sawdust pellet making machine is suitable for the materials with low adhesive and formation rate, which are difficult to pressing molding, such as rice husk, sunflower seed husk, peanut hull, a variety of wood waste like branch, trunk, bark, various of crop straw, eucalyptus, palm fiber(EFB), coffee shell, sawdust and so on.

Wood Sawdust Pellet Cooling Machine

pellet cooler machine

The cooling of pellets is an indispensable process in the wood sawdust pellet making equipment. The counter-flow wood sawdust pellet cooling machine can cool the wood sawdust pellets with a temperature of 70 ℃ -90 ℃ from the pellet mill. to a temperature slightly higher than the room temperature of 3 ℃ -5 ℃, and can be reduced to safe moisture (≤12.5%), which is convenient for pellets transportation and storage.

Wood Sawdust Pellet Packing Machine

wood pellets packing

RICHI automatic wood sawdust pellet packing machine is applied to pack the powder and pellet material into bags, according to a certain speed and weight. Widely used in grain, feed, food, light structuring and chemical industry. Belt feeding scale is suitable for packing powder and pellet, while screw feeding scale is only applicable to packaging of powder.

Comments

Post a Comment

Popular posts from this blog

How to adjust the gap between the pressure roller of the biomass pellet making machine and the ring die?

  The gap between the pressure roller and the ring die is one of the important parameters adjusted during the operation of the biomass pellet making machine . The adjustment process is also one of the important adjustment steps before the operation of the biomass pellet making machine. The rationality of the gap adjustment will directly affect the use of the biomass pellet making machine. Correct adjustment can save the cost of biomass pellet making machine and improve economic benefits. This article introduces 5 kinds of small knowledge about the adjustment of the gap between the pressure roller and the ring die of the biomass pellet machine:   In general, the rotation direction of the biomass pellet mill ring die is clockwise. For a biomass pellet machine equipped with two rollers, the largest eccentric flange of the left roller should be installed in the upper left half of the ring die when the roller is installed. Zone, the largest eccentric flange of the right press rolle...
Post a Comment
Read more

Common faults and maintenance methods of biomass pellet making machine

  The normal operation of the biomass pellet making machine can ensure the production efficiency, so the daily maintenance and maintenance of the biomass pellet making equipment is very important. Due to the long-term operation of the biomass pellet making machine, various failures will inevitably occur, which requires us to accumulate a wealth of experience in troubleshooting for a long time. The following is the maintenance method of our factory for the common faults of the biomass pellet making machine for your reference. Raw materials cannot enter the pelletizing room   Cause of issue: The conditioner is blocked or the feed port is arched Failure of the feeder auger transmission The feeder auger is blocked  Repair method: Clear the conditioner or feed port Check the feeder auger drive device and troubleshoot Clean the material on the feeder auger  There are raw materials entering the granulation chamber but no granules can be pressed Cause of issue: Die hole blo...
Post a Comment
Read more

It is not recommended to buy a small wood pelletizer.

When customers buy wood pelletizer, we generally recommend choosing large ones instead of small ones, because larger models are more stable and durable. why? Let's start with the principle of the wood pelletizer. The principle of the wood pelletizer is that the pressure wheel strongly squeezes the sawdust through the holes of the die to form sawdust pellets. If you replace the abrasive tool or the pressure wheel with wood, can you still make pellets? Obviously not, then go a step further, the mold pressing wheel is made of iron, can it work? Certainly not. The larger the size of the wood pelletizer, the larger and thicker the grinding wheel, the greater the rigidity and strength of the overall model, while the strength of the raw wood chips is unchanged, so the larger the equipment, the more "labor-saving" it is to press, and the stability of the equipment The better the performance, the longer the service life. As the equipment increases, the processing difficulty of th...
Post a Comment
Read more